|
| |
P 336-C-10 Series
Sock-Type Element
Click here for PDF
version of this page
Discussion
The Permian P 336-C-10 filter elements are manufactured using specific
blends of media designed for whatever application in which the element is to
be utilized. This custom design insures the compatibility as well as, the
efficiency of each Permian element. The filter mat produced by the exclusive
Permian process gives a uniform gradient density to the filter media that
provides long life and high particulate retention capacity. The filter media
is placed around a spiral locked metal core that provides superior support
to resist high differential pressures without collapse and subsequent loss
of collected contaminants to the effluent. The filter element produced by
this process provides true depth filtration. It also provides for a gradual
differential pressure increase during the life of the element. The element
will not channel, or by-pass, and the internal compression spring assures a
positive seal in the filter case.
Construction
| Center core |
Carbon steel
corrosion resistant - spiral locked with integral spring |
| Media carrier |
Cerex |
| Media |
Polypropylene |
| Outer sock |
Cotton |
| End seals |
To prevent by-pass, the element can be provided
with a metal plug |
Dimensions
| Outside diameter |
3" (76.2 Mm) |
| Inside diameter |
1-9/16" (39.7 Mm) |
| Length |
36-3/4" (933.45 Mm) |
Operational Data
| Micron Rating |
10 |
| Collapse Pressure |
>150 psi (10.54 kg/cm2) |
| Recommended Change-Out Differential |
15 psi (normal) 20 psi (max.) |
| Efficiency At Rated Flow |
98% |
| PH range |
0 to 14 |
| Max. operating temperature |
180 F |
|
