MENU

Home
Search
Illustrations
BoniFibers H
BIOFUEL FILTERS
SPA FILTERS
SPA & POOL FILTERS
FILTER HOUSINGS
 
HYDRAULIC FILTERS
HYDRAULIC TOOLS
COMPRESSOR KITS
COMPRESSED AIR DRYERS
ORDER
 
ABOUT US
CONTACT US
Gardner Sites

 

 

 

 

 

 

 

 

 

FG-536 SERIES FIBERGLASS ELEMENT

TECHNICAL


The Permian FG-536 series have the following features:

  • The Permian FG-536 series elements are efficient filter-coalescer elements. The molded fiberglass tube is constructed of graded glass fibers, compressed to the proper density and bonded with inert phenolic binders.
  • The fiberglass tube is supported with a heavy-duty, spiral locked center core for superior resistance to collapse. This center core can withstand up to 45 PSI differential pressure without collapsing. 
  • The metal end caps are mechanically attached to the center core for structural strength. The fiberglass media is attached to the end caps with a highly resistant adhesive to prevent any possibility of by-pass. 
  • Buna N gaskets are attached to the end caps with a polyurethane adhesive and go through a special heat treatment. The adhesive is resistant to all hydrocarbons. 
  • The standard Permian FG-536 series filter element will remove particles down to one micron without excessive differential pressure build-up. 
  • A cotton outer wrap protects the fiberglass from dirt and damage during shipment and protects the operator during element change-out.

 

MODELS AVAILABLE


Model 

Height
Outer Diam. Inner Diam. Remarks
FG-536  36.5" 5-1/2" 4-3/16" OPEN BOTH ENDS
FG-536-CE  36.5" 5-1/2" 4-3;16" CLOSED END WITH 5/8" HOLE
FG-536-CE-EXT  36.5" 5-1/2" 4-3/16" CLOSED END WITH EXTENSION
FG-536-CE-R  36.5" 5-1/2" 4-3/16" CLOSED END, REVERSE FLOW
FG-572  72.5" 5-1/2" 4-3/16" OPEN BOTH ENDS

Note: Any of the above element models are available with a rating of 0.5 microns. To designate the 0.5 micron rated element, add a "UF' to the end of the part number. Example: JFG-536-UF

 

PERFORMANCE AND OPERATING DATA


Nominal micron ratings available: 5, 1, 0.5, and 0.3
Recommended maximum operating temperature: 275F
Recommended maximum change-out differential: 15 PSI
Gasket material: Buna N

 

APPLICATION


For use in Peerless Manufacturing, Perry Equipment and King Tool filter-separators and dry gas filters that use the nominal 5-1/2" O.D. element.

 

Models


 

Cat. Model #/Case;
Weight
10141 FG 536 4/18
10145 FG 536-CE 4/20
10952 FG 536-CE-10 4/22
11328 FG 536-CE-5 4/14
10147 FG 536-CE-EXT 4/23
10665 FG 536-CE-EXT-V 4/23
10873 FG 536-CE-G 4/22
10906 FG 536-CE-MP-1 4/22
10760 FG 536-CE-R 4/36
11441 FG 536-MP-0.5A 4/23
10142 FG 536-UF 4/23
10146 FG 536-UF-CE 4/23
10667 FG 536-UF-CE-EXT 4/23
11451 FG 536-UF-R 4/36
  PFG-536-CE-G-EXT-3  
  PFG-536-CE-G-EXT-10  
 

 


 (c) 2001-2009 Gardner & Clark, Inc.
935 Bader Drive, Grand Junction, Colorado 81501
Specializing in International Sales
1-877-784-1212 (970) 241-6470