11" NOMINAL DIAMETER ACTIVATED CARBON CANISTERS
Series AT-1100 activated carbon canisters are designed to be interchangeble with
the canisters used in the absorber vessels manufactured by Peco, Natco and
Nowata, and have the following characteristics:
- Vertical flow to utilize the maximum amount of carbon.
- Highest amount of surface area available.
- Robust construction. The Permian canisters can withstand considerable
abuse without damage.
- Buna N gaskets for positive sealing.
- Two extra strong lifting bails.
The Permian series VF-1100 activated carbon canister is designed for use in
natural gas processing contact solvents, such as amine, glycol, etc., as a foam
control tool. These canisters absorb long chain hydrocarbons and hydrocarbon
color bodies that cause these solvents to foam. These activated carbon canisters
help keep contact solvent losses to a minimum and repay their cost in a very
Length: 20-1/4 and 22-1/4" inches
Outside diameter: 10-3/4 inches
Inside diameter: 2 inches, except for nowata's which is, 1-5/8 inches.
Center core: carbon steel
Outer core: carbon steel
End caps: carbon steel
Gaskets: Buna N
Migration barrier: polypropylene
Media: 8 x 30 mesh activated carbon
Surface area: >16 x 106 square meters
Iodine number: >955
Recommended operating limits
Maximum operating temperature: 120°F
Recommended change-out differential: 15 PSI (max)
Normal canister life: one to two months
Normal flow per canister: 2 USGPM
Note: please note that Permian can manufacture carbon canisters of any
dimension. however, below a 10 inch diameter, it will be necessary to use radial